Thank you very much you are helping me a lot with my preferred hobby!!! this manual of an old TV is going to be very helpful!!!!
You are very honest competent great job very clear and well done!!!!
Text excerpt from page 7 (click to view)
6. Remove the CAM, LOAD in the direction of arrow. Note During Assembling: Rotate the gear fully in the direction of the arrow. Set up the mechanism so that the reference holes of CAM and LOAD are positioned closest to the shaft of LEVER, SW H. Let the CAM and LOAD engage with the teeth of GEAR, IDLER2.
LEVER ASSY, CAM GEAR, IDLER2
The reference hole of CAM, LOAD The shaft of LEVER, SW H