The content of the manual was not found on the Internet and was a hard find. I check the net for 5 hours until I came across this web-site. When I did find the book it Auto loaded into my IPAD PDF shelf for books for review at anytime. Overall I am satisfied with the book and it answered all my questions. This repair book is obsolete because the product I bout it for is pretty old. Thanks for the help with the download and even having the manual. Thanks 73's K5HRD
It was magic after so many years to still be able to source this info. It was equally amazing to return my Pioneer receiver to it near new sound quality AFTER NEARLY 30 YEARS! Thank you for this ability!
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
Easy and secure way to get a complete service manual of a vintage hifi component. Only some parts of the print copy are dificult to read. Nice price!
Text excerpt from page 11 (click to view)
What disc the IC has selected can be understood according to this judgment value. The decision standard of IC is as follows. 0 < Judgment value < 10 10 < Judgment value < 32 32 < Judgment value < C8 LCD displays �CD-d� No disc CD-RW CD-DA and CD-R LCD displays �CD-r� No disc No disc CD-RW CD-DA and CD-R
C8 < Judgment value The state of the FE waveform can also be understood from to this judgment. 3. Confirmation of Sled movement By pressing the F. SKIP of B. SKIP button continuously, it is possible to transfer the pick-up to either the outer side or inner side.
6. Confirmation of each servo It is possible to confirm the adjustment value of each servo by repeatedly pressing the MODE button while the disc is playing, The switchover, sequence is as stated below. Confirmation mode off � Focus Bias (FB) � Tracking Balance(TB) � Tracking Gain (TG) � Tracking Error Offset(TEO)� Focus Gain (FG) � Focus Error Offset (FEO) Confirmation mode off Example: Tracking Error Offset (TEO) Adjustment value: 03
4. Confirmation of the RF level Test point: RF and VC (Vref) Test disc: TCD-782 Confirm that the RF waveform as shown below.
more than 0.8Vp-p
VOL
VOLT/DIV: 200mV TIME/DIV: 0.5 s
Tracking Error Offset (TEO)display
Adjustment value
Adjustment value are displayed in HEX. 5. Confirmation of Tracking balance Test point: TE and VC (Vref) Test disc: TCD-782 Press the DSL button while the test disc playing and confirm the TE waveform is as is shown below.