There are currently no product reviews.
Delivery came quite promptly and in a very readable format. Thank you.
I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
Zeer duidelijke afdrukken op A4-formaat , zeer uitgebreide handleiding . Pluspunt ,zeer snelle
respons van jullie , binnen de 24h . Top !!!
I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
About recorded tracks
â¢ Whenever you stop recording, the audio recorded up to that point will be stored as a track. â¢ A new track is recorded after the end of the last track already stored. â¢ During recording if the playerâs memory becomes full, the OPE indicator flashes in red and the existing tracks will be erased starting with the first track.
To separate tracks automatically (Auto Track)
Set the /AUTO TRACK switch to ON before pressing REC/ERASE in step 3. Recording from the external audio device will automatically be paused when 4 seconds of silence are detected, and all audio recorded to that point will be stored as a track. If an incoming signal is detected again within 20 seconds after entering the recording pause mode, recording will start for another new track. If 20 seconds have passed without any audio signal detected, recording stops automatically, and it will not start thereafter even if there is audio input again. To resume recording, press REC/ ERASE.
â¢ Track separation may not be done correctly depending on the condition of the external audio device and the song to be recorded. â¢ Depending on the connected audio device, the sound may become louder when recording. In this case, adjust the volume on the connected audio device.
Erasing tracks one by one
You can erase tracks while playing, one track at a time.
Play the track you want to erase. Press and hold REC/ERASE. Two short beeps sound in the headphones, and the first 5 seconds of the track are repeated three times while the OPE indicator is flashing in red. Make sure this is the track you want to erase. If you decide not to erase the track Press PLAY/STOP. Playback starts normally from the beginning of the track without erasing the track. The track will not be erased either if no buttons are pressed while the first 5 seconds of the track are repeated.
Press REC/ERASE. The OPE indicator flashes quickly in red. When a long beep is heard, the track is erased, the OPE indicator starts flashing in green, and playback starts normally from the next track.
It takes about 10 seconds to erase a track.
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…