|
Who's Online
There currently are 5917 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
IC, TA1275AZ Pin No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Pin Name
Y OUT DL-MODE R-Y OUT R-Y CONT B-Y OUT B-Y CONT ID FIL R-Y IN VCC B-Y IN GND F0-FIL C IN BELL-FIL Y IN BELLCONT SCP-IN VCC 4.43 CW ID SW SYSTEM
I/O
O O O I O I I I � I � I I I I I I � I I The output pin for Y signal.
Description
The pin for controlling the Y processing mode: to VCC: 5.5MHz trap ; open: 5.5MHz trap + D.L ; to GND: DL. (Not used) The output pin for demodulated R-Y signal. The pin for controlling the black offset level. (Not used) The output pin for demodulated B-Y signal. The pin for controlling the black offset level. (Not used) The pin for connecting the SECAM ident filter capacitor. The input pin for external R-Y signal. (Not used) The VCC pin for Y/C processing block. The input pin for external B-Y signal. (Not used) The GND pin. The pin for connecting a capacitor for automatic adjusting circuit. The chroma signal input pin. The pin for connecting a capacitor for the bell filter fo, 4.286MHz. The Y signal input pin. The pin for selecting the bell filter fo. fo + 70KHz: open ; fo + 35KHz:20k to GND ; fo: to GND. The pin to input the sand castle pulse, SCP. VCC pin for logic block. The pin for input 4.43MHz of carrier wave for self adjustment circuit. The switch pin for selecting the ID detection mode. H + V: connected to VCC ; Auto search: opened ; H: connected to GND. (Not used.)
I/O
The interface pin to the main processor.
- 29 -
|
|
|
> |
|