Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
Excellent quality, very quick download turnaround, will definately use again.
Text excerpt from page 7 (click to view)
ADJUSTMENT
1. Head Azimuth Adjustment Settings : � Test tape : TTS-930 � Test point : Phone Jack (J1) � Tape speed : 2.4cm/sec � Adjustment location : Head azimuth adjustment screw Method : Play back the 5kHz signal of the test tape (TTS-930) and adjust screw so that the output becomes maximum. 2. Tape Speed Adjustment (2.4cm/sec) Settings : � Test tape : TTS-900 � Test point : Phone Jack (J1) � Volume : MAX � Adjustment location : SFR1 Method : Play back the test tape (TTS-900) and adjust SFR1 so that the tape speed becomes 3000Hz ± 10Hz. 3. Tape Speed Adjustment (1.2cm/sec) Settings : � Test tape : TTS-910 � Test point : Phone Jack (J1) � Volume : MAX � Adjustment location : SFR2 Method : Play back the test tape (TTS-910) and adjust SFR2 so that the tape speed becomes 3000Hz ± 90Hz.