A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
Text excerpt from page 18 (click to view)
Drive Operation and Maintenance
Cleaning the Read/Write Head
Caution: The Read/Write Head damage
This unit adopts the MR (Magneto Resistive) Head for the read/write head so that the high density recording is realized. The MR Head is however very sensitive to moisture. To avoid damaging the head as cleaning: � Power off your computer before cleaning the head by using a lint-free cotton swab moistened with more than 90% isopropyl alcohol. � Wait for at least 10 minutes for the head to dry completely. � Never use QIC-80 Cleaning Cartridge or QIC-80 Cleaning Kit. Failure to do so will electrically damage the head.
There are two kinds of methods to clean the read/write head. � One is the method to use the Geneva C3 IRTTAPE Cleaning Cartridge or Imation TRAVAN NS Dry Process Head Cleaning Cartridge. � Another is the method to use a swab which is dampened with more than 90% isopropyl alcohol. Clean the read/write head of this unit in the following cases: � After a new tape cartridge is used. � If a data error occurs. � After every 8 hours of tape operation.
Cleaning the Read/Write Head with the Geneva Cleaning Cartridge or Imation TRAVAN NS Dry Process Head Cleaning Cartridge
Before cleaning the read/write head, make sure this unit is powered on. Follow the instructions included with the cleaning cartridge. Note
The cleaning cartridge tested and approved by AIWA for use with this unit is the Geneva C3 IRTTAPE Cleaning Cartridge ( Part Number: GEN 100-1 ) or Imation TRAVAN NS Dry Process Head Cleaning Cartridge.