1 Hold down DIAL TIMER so that MONTH indicator appears in the display window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the month. 3 Press indicator appears in the display window. DIAL TIMER. DAY 4 Turn and press DIAL TIMER to set the day and then the year. 5 6 When you have finished setting the time, press DIAL TIMER to start the clock.
Tips â¢ To cancel a Dial Timer setting, press any button other than DIAL TIMER or CHANNEL +/â on the unit or any button on the remote while you are making the setting. â¢ To check, change, or cancel the program setting, see âChecking/changing/canceling timer settingsâ on page 53. Notes â¢ If eight programs have already been set using the VCR Plus+ system or the manual timer setting, âFULLâ appears in the display window for about five seconds. â¢ If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set Auto Clock Set correctly. â¢ If you are setting the clock for the first time or â0:â ââ appears in the display window, you cannot set the clock to February 29th using the Dial Timer. Please use the Auto Clock Set feature to set the VCR to this day. â¢ The timer indicator flashes in the display window when you complete the setting in step 9 on page 47 with no tape inserted. â¢ When the setting time is incorrect, âErrorâ appears in the display window in step 9. Set the timer again from step 1.
After you set the year, âAMâ and â12:â ââ appear alternately in the display window. Turn and press DIAL TIMER to set the hour and minute.