There are currently no product reviews.
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
Super nice! Good to have a manual in digital format.
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
To display the timer setting Press SHIFT+TIMER on the remote control. The timer-on time, the source and the timer-activated duration are displayed for 6 seconds.
Timer recording is available only for TUNER and VIDEO/AUX (with an external timer) sources.
1 On the remote control, press SHIFT+TIMER repeatedly to display " REC" and press ENTER.
If ENTER is not pressed within 6 seconds, you will exit the timer setting mode and the previous setting, however, is entered. On the unit, press MODE repeatedly to display "TIMER", and press ENTER within 4 seconds.
Tip: Timer setting can be displayed even while the unit is turned off, and at that time if you press ENTER or a within 6 seconds after SHIFT+TIMER is pressed, you can enter the timer setting mode and change the setting.
To change the timer setting Re-set the timer again. To cancel the timer Press SHIFT+TIMER on the remote control repeatedly until " OFF" is displayed. "5" disappears from the display.
Then turn MULTI JOG within 6 seconds to select " REC", and press ENTER twice within 4 seconds. 2 Carry out step 2 to step 5 described in "Timer playback".
Tip: Your timer setting is retained even if the timer is canceled. Next time the timer is activated, you can change your previous
setting, or simply use the same setting again.
3 Prepare the source.
To record the radio, select the band and tune in to the desired station. To record external equipment connected to the VIDEO/ AUX jacks, set an external timer for the equipment so that its playback begins at the same time.
4 Insert the recording tape in DECK 2 and then turn the unit off. Tip:
The display is dimmed while the timer recording is active.
Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…