AIWA NSXA31
Owner's Manual

,�

MANUAL TUNING

PRESETTING

STATIONS

0-9,+1 o BAND SHIFT

*i-------

=U
button repeatedly to
The unit can store a total of 32 preset stations. maximum AM is pressed while the power of 20 available preset (Each band has a a station is Use the preset stations. ) When stored, a preset number is assigned to the station. number to tune in to a preset station directly.,

� ��

1 Press the TUNER/BAND select the desired band.

rl
1

FM �

When the TUNER/BAND is off, the power is turned

button

on directly.

To select a band with the remote control
Press the BAND button while pressing the SHIFT button.

7 Press the TUNEFVBAND button to select a band, and press the ++ DOWN or FUP button to select a station. 2 Press the II SET button to store the station.
A station consecutive is assigned a preset number, beginning from 1 in order for each band. Frequency

2 Press the+ a station.

DOWN or FD
is pressed,

UP button to setect
changes.

Each time the button

the frequency

When a station is received, �TUNE� is displayed for 2 seconds. During FM stereo reception; [il~ll) is displayed.

Preset

number

To search for a station quickly (Auto Search)
Keep the + starts searching DOWN or > UP button pressed After tuning until the tuner the for a station. in to a station,

3

Repeat

steps 1 and

2.
for one band

The next statiorrwill for all the bands have already

not be stored if a total of 32 preset stations

search stops. To stop the Auto Search UP button.
q

or a total of 20 preset stations

manually, not stop

press the * at stations

DOWN or FF with very weak

been stored.

The Auto signals,

Search

may

PRESET NUMBER TUNING
Use the remote control to select the preset number directly.

When

an FM stereo

broadcast

contains

noise

Press the MONO TUNER button while pressing the SHIFT button on the remote control so that �MONO� appears on the display. Noise is reduced, although To restore stereo reception, disappears. reception is monaural. press these buttons so that MONO

7 Press the BAND button while pressing the SHIFT button to select a band. 2 Press the numbered number.
Example: To select preset number 20, press the +10, +10 and O buttons. To select preset number 15, press the +1 O and 5 buttons.

buttons to select a preset .

Selecting To change the

a preset�number

on the main unit
to select a band. Then, press is

AM tuning interval

Press the TUNER/BAND

button

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval. Press the POWER button while pressing button. To reset the interval, repeat this procedure. the TUNEWBAND

the ~ PRESET button repeatedly. Each time the button is pressed, the next ascending selected.

number

To clear a preset station
Select the preset number of the station to be cleared. the s CLEAR seconds. button, and press the II Then, press within 4 SET button

m
When the AM tuning cleared. The preset interval stations is changed, all preset stations are have to be set again.

The preset numbers

numbers

of all other stations by one.

in the band with higher

are also decreased

9

ENGLISH