|
Who's Online
There currently are 6002 guests and 3 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
PRACTICAL SERVICE FIGURE
< TUNER SECTION >
< FM SECTION >
IHF Sensitivity: (THD 3%) Signal to noise ratio: (Input 54dB) Distortion: (Input 54dB) Auto stop level: Stereo separation: Intermediate frequency: 15dB±5dB (at 90MHz) 14dB±5dB (at 98.0/108.0MHz) More than 55dB (at 98.0MHz) Less than 1.5% (at 98.0MHz) 25±10dB (at 98.0MHz) More than 17dB (at 98.0MHz) 10.7MHz
FL (13-ST-36GNAK) GRID ASSIGNMENT/ANODE CONNECTION
< LW SECTION > (K, EZ MODELS)
Sensitivity: 58±5dB (at 144kHz) 55±5dB (at 198kHz) 52±5dB (at 290kHz) More than 25dB (at 198kHz) 450kHz
GRID ASSIGNMENT
Signal to noise ratio: Intermediate frequency:
< DECK SECTION >
Tape speed: Wow & flutter: Distortion: 3000Hz+3%/�2% Less than 0.35% (JIS, R.M.S) Less than 3.0% (PB) Less than 7.0% (REC) More than 40dB (PB) More than 35dB (REC/PB) More than 55dB More than 50dB More than 35dB
< AM SECTION > (LH MODEL)
Sensitivity: (S/N 10dB) 46dB±5dB (at 600kHz) 44dB±5dB (at 999kHz) 42dB±5dB (at 1404kHz) More than 38dB (at 1000kHz) Less than 4.0% (at 1000kHz) 35-60dB (at 1000kHz) 450kHz
Signal to noise ratio: Erasing ratio: Cross talk: Separation:
Signal to noise ratio: (Input 74dB) Distortion: (Input 74dB) Auto stop level: Intermediate frequency:
< MW SECTION > (K, EZ MODELS)
Sensitivity: (S/N 10dB) 46dB±5dB (at 603kHz) 44dB±5dB (at 999kHz) 42dB±5dB (at 1404kHz) More than 38dB (at 999kHz) Less than 3.0% (at 999kHz) 50+10/-15dB (at 999kHz) 450kHz
ANODE CONNECTION
Signal to noise ratio: (Input 74dB) Distortion: (Input 74dB) Auto stop level: Intermediate frequency:
37
38
|
|
|
> |
|