This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Text excerpt from page 9 (click to view)
Dimmer
Adjusts the brightness of the display.
1 Press MODE repeatedly until "DIMMER ?" appears in the display when the unit is turned on and then press ENTER. 2 Turn MULTI JOG to select one of the three dimmer modes or "OFF" and then press ENTER.
"OFF" is the brightest and "DIMMER 3" is the dimmest. If there is no MULTI JOG or button operation within 6 seconds, the setting is canceled. To cancel the dimmer Repeat the above and select "OFF" in step 2 .
Setting the clock
Use the remote.
To display the time Press DISPLAY on the remote. The time will be displayed for 6 seconds.
1 Press CLOCK/TIMER/SET.
Go to step 3 when the time appears and the 'hour' flashes.
Tip: "AM 12:00" indicates midnight and "PM 12:00" noon.
If "- -:- -" appears when the unit is turned off There has been a power interruption. Re-set the clock.
2 Press r or t repeatedly until "CLOCK SET" appears in the display and then press ENTER. 3 Press r or t repeatedly to set the hour and then press ENTER. 4 Press r or t repeatedly to set the minute and then press ENTER.
The time display stops flashing and the clock starts from 00 seconds. �MULTI JOG is also available in place of r or t.