|
Who's Online
There currently are 5908 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
;
The manual was exactly what I wanted and I found it nowhere else. Thanks!
;
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
WHEN THE �OVER LEVEL� INDICATOR LIGHTS UP
When input analog signals from the connected equipment are too high to accept, the OVER LEVEL indicator lights up. In this case, adjust the input level so that the indicator disappears.
RECORDING AN AUDIO SOURCE
FUNCTION
FUNCTION
To lower the sound level of the connected source
1 Select the function to be adjusted.
Turn FUNCTION and play the source.
2 Press TUNING M repeatedly.
The level is decreased as follows.
0 dB �6 dB �12 dB
INPUT MODE
To restore the previous level, press
TUNING N repeatedly .
1 Select the program source to be recorded.
� When the analog output of the CD player or DVD player is 2 Vrms, set the level to �6 dB. Turn FUNCTION (or press FUNCTION repeatedly).
2 Set the tape deck or MD recorder to recording mode. 3 Start the selected program source.
NOTE � Any sound control system has no ef fect on recording (see page 9). � Input sound through the DIGIT AL IN terminals cannot be recorded. When recording the sound from the DVD, CD, MD or LD player , connect the analog AUDIO OUT terminals of the player to the corresponding AUDIO IN terminals of the receiver . The sound will be recorded in 2 ch stereo. � Input sound from the tape deck connected to the TAPE IN terminals cannot be recorded.
En
ENGLISH
11
BASIC OPERATIONS
When the analog sound level of the connected source is higher than that of the FM and AM functions, adjust it as follows.
|
|
|
> |
|