|
Who's Online
There currently are 5870 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
ADJUSTMENT
<RADIO SECTION>
1. AM IF Adjustment L205 ...................................................................... 450 kHz 2. AM VT Check Settings : � Test point : TP1 (VT) Method : Set to AM 530 kHz, and check that the test point is 1.0 V ± 0.3 V. Then set to AM 1710 kHz, and check that the test point is less than 9.0V. 3. FM VT Check Settings : � Test point : TP1 (VT) Method : Set to FM 87.5 MHz, and check that the test point is 4.0 V ± 0.1 V. Then set to FM 108.1 MHz, and check that the test point is less than 9.0V. 4. AM Tracking Adjustment L203 ...................................................................... 630 kHz TC201 .................................................................. 1440 kHz 5. FM Tracking Adjustment L201 .................................................................... 87.5 MHz
<TAPE PLAYER SECTION>
6. Tape Speed Adjustment Settings : � Test tape : TTA�100 � Test point : Phones Jack (J101) � Volume : MAX � S-Bass : OFF �Tape selector : Normal � Adjustment location : SFR401 Method : Play back the test tape and adjust SFR401 for 3015 Hz ± 10 Hz (FWD). Then confirm WOW is less than 0.52%. 7. Head Azimuth Adjustment Settings : � Test tape : TTA�320/TTA�330 � Test point : Phones Jack (J101) � Volume : MAX � S-Bass : OFF �Tape selector : Normal � Adjustment location : Head azimuth adjustment screw Method : Play back the 8 kHz signal of the test tape and adjust the screw so that the output becomes maximum.
� 10 �
|
|
|
> |
|