I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
Text excerpt from page 6 (click to view)
ADJUSTMENT
MECHANICAL EXPLODED VIEW 1 / 1
A MAIN C.B
P HEAD
VOLUME
IC 1
VR1
2 FWD
PHONES
SFR 51
J1
1 2
1
1. Tape Speed Adjustment Settings : � Test tape :
Method :
TTA � 100 (Tape center) � Test point : Phones Jack (J1) � Adjustment location : SFR51 � MSP : CLASSIC � Tape selector : NORM � Volume : Non � clip (MAX � 10dB) Play back the test tape and adjust SFR51 so that the frequency becomes 3000Hz ± 10Hz. Then confirm WOW is less than 0.50%.
TTA � 330 / TTA � 420 CLASSIC MAX NORM Head azimuth adjustment screw Play back (FWD) the test tape and adjust screw so that the 8kHz signal output is maximum.