Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 7 (click to view)
AUXILIARY EQUIPMENT
Listening to a CD/MD/MP3 portable player or other equipment
You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information. Be sure to remove the inserted cassette to prevent possible damage to the unit before connecting the equipment.
CD CHANGER OPERATION
Playing a CD
You can play CDs from a connected AIWA CD Changer. For detailed information on installing a CD Changer, refer to the Installation and Connection manual supplied with the CD Changer.
SRC
DISCN/DISCM
r/t
SRC
AUX jack CD Changer indicator
INT RNDM REP 1 REP
1 Connect a CD/MD/MP3 portable player or other
equipment to the unit�s AUX jack (3.5-mm dia.).
2 Press SRC repeatedly until �AUX IN� appears in the
display. CD number Track number
OTHER FUNCTIONS
1 Press SRC repeatedly to display �CD-CH.� The CD Changer play starts.
To Skip to the next track Skip back to the beginning of the current track or to the previous track Press t r
AUDIO CONTROL
SRC SEL
Advance rapidly to locate a desired point Reverse rapidly to locate a desired point Start CD Changer play from the first track on the next disc Start CD Changer play from the first track on the previous disc
and hold t, then release it at the desired point and hold r, then release it at the desired point DISCN
Changing the contrast of the display
1 Press and hold SRC until �CONT.� appears in the
display. 2 Turn AUDIO CONTROL to select L (for low) or H (for high).
DISCM
Setting the dimmer of the display
1 2 Press and hold SEL until �DIMMER� appears in the display. Turn AUDIO CONTROL to select �DIMMER 0 (bright)� or �DIMMER 1 (dimmed).�
