This manual is all I need to check and repair my equipment. Thank you....
Text excerpt from page 12 (click to view)
PRACTICAL SERVICE FIGURE
Sensitivity: (T.H.D 3%) Signal noise ratio: Distortion: If frequency: Stereo separation: Less than 22dB (at 88, 98, 108MHz) More than 45dB Less than 3.0% 10.7MHz More than 20dB Signal to noise ratio:
Tape speed: Wow & flutter: Erasing ratio: Distortion: 2940-3090Hz Less than 0.45% More than 30dB Less than 3% (PB) Less than 8% (REC/PB) More than 45dB (PB)
Sensitivity: (at S/N 10dB) AU MODEL Less than 50dB (at 600kHz) Less than 47dB (at 1000, 1400kHz) EXCEPT AU Less than 50dB (at 603kHz) Less than 47dB (at 999, 1404kHz) More than 30dB (at 1000kHz) Less than 3% (at 1000kHz) 455kHz
Signal noise ratio: (5mV/m) Distortion: If frequency: