There are currently no product reviews.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Irrespectively of this manual exist only germany language, it's useful - although i need some additional task to translate: My english is bad, but usable - but i really dont speak germany. :)
Excellent service from this company (including a total refund on an earlier purchase when through no fault of the company the manual was incomplete). I have purchased several manuals which I have been very satisfied with, as I am with this one. Highly recommended.
It was easy to order and received exactly what I needed. Only complaint would be the 24 hours you have to wait.
IMPORTANT Make sure that FUNCTION is set to (!) STANDBY POWER/ TAPE before connecting the AC cord or inserting batteries.
Before connecting the AC cord (LH model only) Check that the rated voltage shown on the rear panel matches your local voltage. To ~jm;.fi= ;~21;match your local voltage, switch the AC VOLTAGE selector (AC 11O-120/220-240 V, AC VOLTAGE switchable) in the battery compartment with
a screwdriver or similar tool.
Connect the AC cord as illustrated
to an AC outlet
(LH model only)
CAUTION Use only the supplied AC cord. Use with other cords may result in the risk of fire.
Open the lid of the battery compartment on the rear and insert eight RI 4 (size C) batteries, not supplied, as illustrated below. Then close the lid. c Before using on batteries, disconnect the AC cord from the AC inlet. Battery power is cut off automatically cord is connected. when the
To clean the cabinet Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents such as qlcohol, benzine or thinner. To clean the heads and tape paths After every 10 hours of use, clean the heads 0 and 0, the pinchroller @ and capstan ~. Use a cotton swab @ slightly moistened with cleaning fluid or denatured alcohol.
The batteries need to be replaced when: The OPE/BATT indicator becomes dim, the tape speed slows down, volume decreases, operation.
Notes on batteries
or sound is distorted during To clean the lens Use a cotton swab slightly moistened with cleaning fluid. Wipe gently from the c&ter to the edge. Lens
To avoid damage from leakage or explosion, observe the following: Insert the batteries with the 0 and ~ marks correctly
aligned. Do not mix different types of batteries or old batteries with new ones. Never recharge the batteries, apply heat to them or take them apart. Remove dead batteries. If liquid leaks from the batteries, wipe thoroughly to remove.