|
|
|
Who's Online
There currently are 365 guests and
2 members online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
;
Very good detail, all pages clear, exactly what I needed
4. Adjustment procedure
(1) PIT disc (TEST DISC: TGYS1) Insert a disc and press the âPLAYâ key. (Be careful of the direction of the unit.) After âAUTO ADJ Hâ appears on the LCD of the remote control, âCOMPLETEâ appears. (2) GRV disc (SONY MDW-74) Insert a disc and press the âPLAYâ key. (Be careful of the direction of the unit.) After âAUTO ADJ Lâ appears on the LCD of the remote control, âCOMPLETEâ appears. * If âFailedâ appears during adjustment, it means that the adjustment was suspended due to an error.
5. Others
(1) Initializing the EEPROM While âIDLEâ is displayed, press the DISP/SEARCH key to initialize the EEPROM. After initialization, âEP INIT OKâ appears on the LCD. * After initialization, perform the adjustment again, otherwise âNO ADJUST!â will appear during normal use.
TR NO.
EP I NT
OK
(2) Sled operation check While âIDLEâ is displayed, move the pickup to the outer circumference by pressing the F-SKIP, then move the pickup to the inner circumference by pressing the B-SKIP.
22
|
|
|
> |
|
